Ntopng gzip cpu usage how to#
Ntopng gzip cpu usage install#
Ntopng gzip cpu usage update#

So, in our example, we have set the ntopng service to monitor the traffic on interface eth0. Make the following edits to reflect your settings (most important is the network interface and -w parameter for the port (-G parameter is already set by default): -G=/var/run/ntopng.pid -i=eth0 -w=3000 Now we need to adjust the config file to our needs. Now, we need to edit the ntopng configuration located at /etc/ntopng/nf and enter Network Interface, Port, and Location of the PID. In our case, we use eth0 network interface for our local network, but you need to check for your own (in most cases it is eth0 for LAN). Configure NtopngĪfter ntopng installation you need to check which network interface you are using with the IP command: $ ip a 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft foreverĢ: eth0: mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 08:00:27:14:86:db brd ff:ff:ff:ff:ff:ff inet 192.168.0.15/24 brd 192.168.0.255 scope global dynamic eth0 valid_lft 86365sec preferred_lft 86365sec inet6 fe80::a00:27ff:fe14:86db/64 scope link valid_lft forever preferred_lft forever Now we should configure the application and web interface.

Ntopng gzip cpu usage install#

Now install the ntopng and other required packages: $ sudo apt-get install pfring-dkms nprobe ntopng n2disk cento -y If you have done everything correctly, you should see the added repository in the terminal output: Get:6 圆4/ InRelease

Ntopng gzip cpu usage update#

b Install ntopng on the local serverįirst, update the apt since we added a new repository to our Ubuntu linux system: $ sudo apt-get update -y Once the package is downloaded, install it using the following command: $ sudo apt install.

Now download the package and add the ntopng repository: $ sudo add-apt-repository universe Next, install the required packages: $ sudo apt-get install software-properties-common wget gnupg -y The ntopng package is not available in the Ubuntu 20.04 default repository, so we need to add the ntopng repository to APT.įirst, update your base system with the latest available packages: $sudo apt-get update -y

Ntopng gzip cpu usage how to#

In this tutorial, we will learn how to install ntopng tool on Ubuntu 20.04 and use it to monitor the local network. There are professional and enterprise editions of Ntopng which have licensing requirements, and the free community edition. It supports different operating systems like Linux, Mac OS, BSD, and Windows. It is the next-generation version of the original ntop which shows the network usage, statistics, and analytic. Ntopng is free, open-source software that provides a web interface for real-time network traffic monitoring.